Fits 1967-1969 Chevrolet Camaro and Pontiac Firebird, 3.0 inch Aluminized Pipes - Aggressive sound
This crossmember-back American Thunder system is custom designed for high horsepower and large cubic inch engines in 1967-1969 Chevrolet Camaro and Pontiac Firebirds with a V8 engine. It's a true-dual exhaust system featuring all mandrel-bent 3.00-inch aluminized steel tubing with a built-in H-pipe crossover assembly flowing into a pair of large cased Super 40 Series performance mufflers for maximum power and a deep powerful aggressive exhaust note. The large 3.00-inch mandrel-bent tailpipes are custom bent to tuck up high above the rear end and exit with a slight turn down at the quarter panels behind the rear wheels. The system is constructed from aluminized steel and includes all necessary hardware and hangers for installation. Covered by our 3-year Limited Warranty.
- H-pipe Crossover for Maximum Power and Deep Tone
- Super 40 Series Mufflers for Deep Powerful Sound
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Includes Hangers and Hardware for Installation
- Moderate to Aggressive Exterior Exhaust Tone
- Crossmember-back True Dual Exhaust System
- Does Not Include Header Reducers or Downpipes for Factory Manifolds
- Large Dual 3.00-inch Tubing
Information:
Does not fit convertibles without an X-brace modification. The brace will need to be shimmed down enough to clear the new exhaust pipes.
Application Summary:
| Year |
Make/Model |
| 1967-1969 |
Chevrolet Camaro |
| 1967-1969 |
Pontiac Firebird |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B000QJH2CY |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Header-back System |
| California Proposition 65 |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042020454 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Muffler Count |
2 |
| Muffler Part Number |
953046 |
| Muffler Quantity |
2 |
| Muffler Series |
Super 40 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tube Diameter |
3 inch, 3.00 |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Crossmember-back |
| Type of Exhaust |
Header-Back, Crossmember-back |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
