1993-1995 Chevrolet/GMC trucks with a 5.0L or 5.7L engine with flanged catalytic converter. - Mild sound
This Flowmaster Force II® cat-back exhaust system is custom designed for 1993-1995 Chevrolet Tahoe/GMC Yukon with 5.7L engine and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a 70 Series Big Block II™ muffler for a deep mellow tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip behind the right rear wheel and uses the factory hanger locations. Also includes an aluminum heat shield with strap clamps to secure it to the muffler. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home. Notes: Fits 2/4 wheel drive models with Extended Cab/Short bed configuration on a 141-inch wheelbase.
- Includes Aluminum Heat Shield and Stainless Steel Clamps
- Uses the Factory Hanger Locations
- 3-year Limited Warranty
- Flowmaster Quality
- Easy Installation
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- 70 Series Big block II Performance Muffler
- Dyno Tuned for Maximum Performance
- Mild-Moderate Exterior Exhaust Tone
- Great Choice for Towing Applications
Information:
Fits 1993-1995 Chevrolet/GMC trucks with a 5.0L or 5.7L engine with flanged catalytic converter. Fits 2/4 wheel drive models with Extended Cab/Short bed configuration on a 141-inch wheelbase.
Application Summary:
| Year |
Make/Model |
| 1993-1995 |
Chevrolet C1500 |
| 1993-1995 |
Chevrolet K1500 |
| 1993-1995 |
GMC C1500 |
| 1993-1995 |
GMC K1500 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CNLA2C |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild to Moderate Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042011681 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Muffler Count |
1 |
| Muffler Part Number |
53072 |
| Muffler Quantity |
1 |
| Muffler Series |
70 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
