Fits 1969 Chevrolet Camaro and Pontiac Firebird with V8 engine, 2.5" Aluminized Pipes - Aggressive to moderate sound
This American Thunder® exhaust system comes as a complete true dual crossmember-back exhaust for your 1969 Chevrolet Camaro or Pontiac Firebird with V8 engine. These dual systems feature 2.50-inch mandrel-bent aluminized steel tubing for maximum performance, includes a built-in H-pipe/balance tube flowing into a pair of Super 44® mufflers that deliver an aggressive to moderate interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. The 2.50-inch tailpipes exit straight out under the rear bumper and are finished off with 2.50-inch angle-cut brushed stainless steel tips and includes all hangers and necessary hardware for installation. Like all Flowmaster® systems, the benefits include improved throttle response, power and mileage. Covered by our 3-year Limited Warranty.
  • H-pipe Crossover for Maximum Power and Deep Tone
  • Exits in the Factory Location
  • Flowmaster Quality
  • Super 44 Series Mufflers for Deep Powerful Sound
  • Mandrel-bent 16-gauge Aluminized Steel Tubing
  • Includes Hangers and Hardware for Installation
  • Moderate to Aggressive Exterior Exhaust Tone
  • 2.50-inch Angle Cut 304 Stainless Steel Tips
  • Crossmember-Back True Dual Exhaust System
  • Does Not Include Header Reducers or Manifold Downpipes

Information:

Note: Does not fit Convertible models without modification to the factory X-brace. You will need to shim the brace with 3/8-inch of spacers or purchasing Hotchkis Performance Convertible brace Part# 1404.

Application Summary:

Year Make/Model
1969 Chevrolet Camaro
1969 Pontiac Firebird
Attributes
2WD/4WD 2WD
ASIN B000CEG26U
Brand Flowmaster
Bullet Point #1 Mandrel bent 16 Gauge Tubing
Bullet Point #2 Moderate to Aggressive Sound Exterior Exhaust Tone
Bullet Point #3 Includes hangers and hardware for easy installation
Bullet Point #4 Header-back System
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Catalytic Converter Quantity Not Included
Category Exhaust
Clamping Type U-Bolt
Country of Origin (Primary) US
Emission Code 3, 5
Exhaust Series American Thunder
Exhaust Type Dual
Exit Position Dual Rear, Dual Out Rear
Exit Style Straight
GTIN 00700042014545
Harmonized Tariff Code (Schedule B) 8708925000
Hazardous Material Code N
Heat Shield No
Heat Shield Attached No
Inlet Diameter 2.500 in., 2.50
Inlet Diameter (in) 2.5
Inlet Inside Diameter N/A
Inlet Inside Diameter (in.) N/A
Inlet Size (in.) N/A
Life Cycle Status Code Available to Order
Main Piping Diameter 2-1/2
Material Aluminized Steel
Muffler Count 2
Muffler Part Number 942546
Muffler Quantity 2
Muffler Series Super 44 Series
Muffler Type Chambered
NAFTA Preference Criterion Code B
Outlet Diameter 2.500 in., 2.50
Outlet Diameter (in) 2.5
Outlet Outside Diameter 2.500 in.
Outlet Outside Diameter (in.) 2.5
Outlet Size (in.) 2.5
Product Type Exhaust Systems / Kits, Exhaust System
SDR Required Flag N
SDS Sheet Number N
Series American Thunder Exhaust Systems
Single Dual Dual
Single or Dual Dual
Sound Level Moderate/Aggressive, Aggressive / Moderate
Sub Category Exhaust and Tail Pipes
Subcategory Complete Exhaust Kits
System Type Header Back, Crossmember-back
Tail Pipe Diameter 2.500 in.
Tip Diameter 2.500 in., 2.50
Tip Diameter (in) 2.5
Tip Diameter (in.) 2.5
Tip Quantity 2
Tip Size 2.5 in.
Tube Diameter 2.5 inch, 2.50
Tubing Diameter 2.500 in., 2.50
Tubing Diameter (IN) 2.5
Type Crossmember-back
Type of Exhaust Header-Back, Crossmember-back
Warning California Proposition 65
Warranty Time 36
part type Exhaust System Kit

Write a review.

Note: HTML is not translated.
    Bad           Good

Flowmaster 17139 69-69 GM F-BODY 2.5 AMT KIT

Product Information

Call for Pricing

Vehicle Fitment