MACH Force-Xp 3 IN 409 Stainless Steel Cat-Back Exhaust System w/Polished Tip Toyota Tacoma 16-23 V6-3.5L
aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out of 3 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5 diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.
- Produces An Astonishing 9 HP And 15 ft./lbs. Torque
- Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
- High Quality Flange And Band Clamps Improve Sealing Surface
- Straight Through Design Free-Flowing Stainless Steel Muffler
- Reuses Factory Mounting Locations For A Hassle-Free Installation
Information:
Produces An Astonishing 9 HP And 15 Lbs X Ft Torque; Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow; High Quality Flange And Band Clamps Improve Sealing Surface; Straight Through Design Free-Flowing Stainless Steel Muffler; Reuses Factory Mounting Locations For A Hassle-Free Installation
Application Summary:
Year |
Make/Model |
2016-2023 |
Toyota Tacoma |
Attributes |
California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Country of Origin (Primary) |
US |
Exhaust Type |
Cat-Back |
Exit Location |
Passenger side, Passenger side |
Exit Position |
Rear Side |
Exit Style |
Turn Out |
GTIN |
00802959497944 |
Harmonized Tariff Code (Schedule B) |
8708925000 |
Hazardous Material Code |
N |
Horse Power Increase |
9, 9 |
Inlet Inside Diameter |
3.000 in. |
Inlet Inside Diameter (in.) |
3 |
Inlet Size (in.) |
3 |
Life Cycle Status Code |
Available to Order |
Material |
Stainless Steel |
Muffler Finish |
Natural |
Muffler Included |
Yes, Yes |
Muffler Material |
409 Stainless Steel, 409 Stainless Steel |
NAFTA Preference Criterion Code |
B |
Outlet Outside Diameter |
3, 3 |
Outlet Outside Diameter (in.) |
3 |
Outlet Size (in.) |
3 |
SDR Required Flag |
N |
System Finish |
Natural, Natural |
System Material |
409 Stainless Steel, 409 Stainless Steel |
Tail Pipe Material |
Stainless Steel |
Tip Cut |
Slant, Slant |
Tip Diameter |
4.500 in. |
Tip Edge Style |
Rolled edge, Rolled edge |
Tip Finish |
Polished, Polished |
Tip Included |
Yes, Yes |
Tip Material |
304 stainless steel, 304 stainless steel |
Tip Outlet Size |
4.5, 4.5 |
Tip Quantity |
Single, Single |
Tip Size |
4.5 in. |
Torque Increase |
11, 11 |
Tubing Diameter |
3, 3 |
Warranty Time |
2 |