MACH Force-Xp 3 IN 409 Stainless Steel Cat-Back Exhaust System w/Polished Tip GM Silverado/Sierra 1500 09-18 / Silverado LD/Sierra Limited 2019 V6-4.3/V8-4.8/5.3L
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
- 3 in. Mandrel Bent Stainless Steel
- 100% Hand TIG Welded
- Leak Free Seal
- Aggressive Sound
Information:
3 in. Mandrel Bent Stainless Steel; 100 Percent Hand TIG Welded; Leak Free Seal; Aggressive Sound
Application Summary:
| Year |
Make/Model |
| 2009-2018 |
Chevrolet Silverado 1500 |
| 2019 |
Chevrolet Silverado 1500 LD |
| 2009-2018 |
GMC Sierra 1500 |
| 2019 |
GMC Sierra 1500 Limited |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Exhaust Type |
Cat-Back |
| Exit Location |
Passenger and Driver Side, Passenger and Driver Side |
| Exit Position |
Dual Side Rear |
| Exit Style |
Turn Out |
| GTIN |
00802959497715 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Horse Power Increase |
14, 14 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| Muffler Finish |
Natural |
| Muffler Included |
Yes, Yes |
| Muffler Material |
409 stainless steel, 409 stainless steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| SDR Required Flag |
N |
| Sound Level |
Moderate, Moderate |
| System Finish |
Natural, Natural |
| System Material |
409 Stainless Steel, 409 Stainless Steel |
| Tail Pipe Material |
Stainless Steel |
| Tip Cut |
Slant, Slant |
| Tip Diameter |
4.500 in. |
| Tip Edge Style |
Rolled edge, Rolled edge |
| Tip Finish |
Polished, Polished |
| Tip Included |
Yes, Yes |
| Tip Material |
304 stainless steel, 304 stainless steel |
| Tip Outlet Size |
4.5, 4.5 |
| Tip Quantity |
Dual, Dual |
| Tip Size |
4.5 in. |
| Torque Increase |
17, 17 |
| Tubing Diameter |
3, 3 |
| Warranty Time |
2 |
