MACH Force-Xp 2-1/2in 409 Stainless Steel Axle-Back Exhaust System Ford Mustang 05-09 V6-4.0L
aFe introduces the MACH Force XP axle-back exhaust system for the 05-09 Mustang V6-4.0L. In recent testing this system produced 9 horsepower and 11 lbs. x ft. of torque. This exhaust is constructed from 2.5 in. mandrel-bent, stainless steel and is MIG-welded. The system uses a high-flow, stainless steel muffler which improves performance across the power band while maintaining a great tone. To finish off this exhaust is a 3.5 in. rolled edge, 304 stainless steel aFe laser etched tip. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
- 2.5 in. Dia. Stainless Steel
- All Hardware Supplied
- Direct Bolt On
- No Cutting Required
- No Modifications Necessary
- 50 State Legal
- 2 Year Limited Warranty
- 100% Hand MIG Welded
- 3.5 in. 304 Stainless Steel Rolled Edge Round Tip
- Hassle Free Installation
- Factory Hanger Locations
Information:
2.5 in. Dia. Stainless Steel; 100 Percent Hand MIG Welded; 3.5 in. 304 Stainless Steel Rolled Edge Round Tip; Hassle Free Installation; Factory Hanger Locations; All Hardware Supplied; Direct Bolt On; No Cutting Required; No Modifications Necessary; 50 State Legal; 2 Year Limited Warranty
Application Summary:
| Year |
Make/Model |
| 2005-2009 |
Ford Mustang |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Exhaust Type |
Axle-Back |
| Exit Position |
Single Rear, Single Rear |
| Exit Style |
Straight |
| GTIN |
00802959496190 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
2.5, 2.5 |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Material |
409 Stainless Steel, 409 Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
2.5, 2.5 |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| SDR Required Flag |
N |
| Tail Pipe Material |
Stainless Steel, Stainless Steel |
| Tip Diameter |
3.500 in. |
| Tip Size |
3.5, 3.5 |
| Tubing Diameter |
2.5, 2.5 |
| Warranty Time |
2 |
