MACH Force-Xp 2-1/2in 409 Stainless Steel Cat-Back Exhaust System Ford Mustang 05-09 V6-4.0L
Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.
- 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
- 100% Hand MIG Welded
- Dual 3.5 in. 304 Stainless Steel Rolled Edge Round Tips
- Hassle Free Installation
- Factory Hanger Locations
- All Hardware Supplied
- Direct Bolt On
- No Modification Necessary When Using V8 Rear Bumper Cover
- 2 Year Limited Warranty
Information:
2.5 in. Mandrel Bent 409 Stainless Steel Tubing; 100 Percent Hand MIG Welded; Dual 3.5 in. 304 Stainless Steel Rolled Edge Round Tips; Hassle Free Installation; Factory Hanger Locations; All Hardware Supplied; Direct Bolt On; No Modification Necessary When Using V8 Rear Bumper Cover; 2 Year Limited Warranty
Application Summary:
| Year |
Make/Model |
| 2005-2009 |
Ford Mustang |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Exhaust Type |
Cat-Back |
| Exit Position |
Split Rear, Split Rear |
| Exit Style |
Straight |
| GTIN |
00802959496152 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
2.25, 2.25 |
| Inlet Inside Diameter (in.) |
2.25 |
| Inlet Size (in.) |
2.25 |
| Life Cycle Status Code |
Available to Order |
| Material |
409 Stainless Steel, 409 Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
2.25, 2.25 |
| Outlet Outside Diameter (in.) |
2.25 |
| Outlet Size (in.) |
2.25 |
| SDR Required Flag |
N |
| Tail Pipe Material |
Stainless Steel, Stainless Steel |
| Tip Diameter |
3.500 in. |
| Tip Size |
3.5, 3.5 |
| Tubing Diameter |
2.25, 2.25 |
| Warranty Time |
2 |
